Prodotti

TANDEM PRO Line

The unit is built to receive nitrogen in inlet pressure from standard industrial cylinders starting from a minimum pressure of 30 Bar / 435 Psi up to 414 Bar / 6000 Psi to bring it under pressure to 414 Bar / 6000 Psi passing through a pressure switch that gives the possibility to regulate the switching off of the Booster at even lower pressures. Exceeding the maximum pressure is prevented by a proportional relief valve positioned on the gas outlet connection.

Air Piloting System
The 1/2 BSP inlet fitting is provided for air piloting. The inlet air pressure should be up to 10 Bar. The inlet pressure should be approximately 1/60 of the desired maximum nitrogen outlet pressure.

Outlet Pressure Control
The system, component 01, will automatically start working when the ball valve, component 04, is open. With the ball valve, component 04, it is also possible to manage the working speed. The system, component 01, will transfer nitrogen under pressure to the accumulator connected to the gas outlet of the system up to a maximum of 414 Bar.
The pneumatic pressure switch, component 08, allows to control the maximum outlet pressure regardless of the inlet pilot pressure. The maximum pressure preset in production is 414 Bar, but it can be modify, if necessary, between 100 Bar and 414 Bar, by unlocking the ring nut (08B) that blocks the knob (08A) and screwing it to increase or unscrewing to decrease the shutdown value of the Booster.

CONTACT US OR YOUR DISTRIBUTOR FOR MORE INFORMATION

Dati tecnici