C1

Booster C1 is recommended for CCR Divers and for uses where high flow rates are not required.
Designed as Booster for sporting use, but thanks to its robust construction, it can also be used in the professional sector.
The Booster C1 is built with an innovative system that significantly reduces air consumption during operation.

Construction materials

Body: ergal, stainless steel 316, brass OT 58

Seals: fkm, ecopur, teflon, composit

Overcooled head and cylinder

Technical data

Pressure ratio: 25/1
Drive air: 9-14 bar
Piston stroke: 1 x 40 mm
Displacement: 8 cc
Max boost pressure: 310 bar
Min suction pressure: 5 bar
Min pumping speed: 15 cycles/minute
Max pumping speed: 140 cycles/minute

Weight: Kg 3.3

dimensions: 21x9xH12 cm

Versions

C1 Integration Booster C1

Weight: 3.3 kg
Dimensions: 21x12x9 cm

Booster C1 has a connection for the pilot air with connector for Low-pressure inflator hose from regulator
and therefore it can be used to operate with any pressure regulator,
provided it is calibrated with an intermediate pressure from 9 to 10 Bar

C1 Expedition Booster C1

Weight: 5.8 kg
Dimensions: 34x15x30 cm

Booster C1 has a connection for the pilot air with connector for Low-pressure inflator hose from regulator
and therefore it can be used to operate with any pressure regulator,
provided it is calibrated with an intermediate pressure from 9 to 10 Bar
The " case" version is complete with hoses, pressure gauge and connections
( pressure reducer is only in C2 and C4 versions)